Intimus Pro 20 SC2 Operations Instructions download pdf (Page 5)

20SC2

20CC3







89823 5 03/13



Dispose of the machine in an

environmentally sound fashion at the

end of its useful service life. Do not

dispose of any of the parts included

in the machine or its packaging with

household trash.



When the shredded material becomes visible in



to empty the receptacle.

Proceed as follows:

        

machine and empty its contents.

 

and push all the way to the back.

Note: The machine will only run when the recep-

tacle is pushed completely into the machine.







guide (for example after a paper jam) it is pos-

sible that the machine will not turn off, due to the

covered light barrier.

To remove these paper strips and also to clean

the photocell, pass another sheet of paper through

the feed slot, or switch the machine to reverse and



TECHNICAL DATA



ACCESSORIES

Cutting width:

intimus 20SC2: 4 mm

intimus 20CC3: 4x28 mm

Cutting capacity paper:

intimus 20SC2: 11 sheets* (70g/m

)

intimus 20CC3: 7 sheets* (70g/m

)

Supply voltage: 220V-240V/50Hz

120V/60Hz

100V/50/60Hz

Pre-fusing: 10 amps (slow-blow)

Working width: 230 mm

Noise level: approx. 55 dB(A)

Power: see name plate

Intermittent operation: 

 

Dimensions:

Width: 350 mm

Depth: 270 mm

Height: 480 mm

Weight: ca. 9.8 kg

Description 

Lubricant, 110 ml bottle 88035

Note: For orders of special accessories and spare parts, please contact your dealer.



(Auto-reverse function)

         

material, the machine reacts as follows:

- The cutting mechanism is blocked, then runs

      

stops. The motor is switched off. The control

display (6)   lights up. Proceed as

follows:

      

Subsequent the cutting mechanism starts

shortly running forward automatically to cut the

remained material. The control display (6)



Note:    (6) still





cutting mechanism starts running forward again

-

sary repeat this procedure until the material is

completely run through and shredded.

- Continue shredding, feeding smaller quantities

of paper.



The motor shuts down automatically, should it

become overloaded. The control display 

1) lights up. Turn the machine off with the rocker

 

Allow the motor to cool down for 25 to 30 minutes

(depending upon room temperature) and then

continue shredding.



-

wing:

 plug connected to the mains?

Mains connection: 2-pole mains switch,

internal appliance plug,

separate power cord

- is the rocker switch (1) switched on?

- is the receptacle pushed in?

- is there a material jam in the machine?

     



- has the motor been overloaded?

Wait until the motor has cooled, and then re-

start.

If none of the above applies, please contact



OPERATION

* based on A4-paper 70g/m² at 230V -10%, 50Hz

DISPOSING





Cross-cut cutting mechanism should be

oiled regular after a certain operating time

to maintain the cutting performance.

This can be easily accomplished if you

     



and feed it through the inlet guide to the cutting





Please make sure that the shredder is switched



in position ).





1 2 3 4 5 6 7 8 9 10 ... 35 36

Comments to this Manuals

No comments

Intimus Pro 20 SC2 Operations Instructions Page 5

Comments to this Manuals

Related products and manuals for Paper shredders Intimus Pro 20 SC2