Intimus 120 CC4 User Manual download pdf (Page 5)

IMPORTANT SAFETY NOTES

<< The machine may not be operated by more

than one person at any given time!

The machine was designed for safe operation

by “one person only”.

<< During the shredding process no other

work may be performed on the machine

(for example cleaning, etc.)!

<< The machine is not a toy, and is not suitable

for use by children!

The overall technical safety concept of

this machine (dimensions, feed openings,

emergency shutdown devices etc.) does not

provide for any guarantee regarding hazard-

free operation by children.

<< Danger of injury! Keep all

loose articles of clothing, ties,

jewelery, long hair or other loose

objects away from opening!

<< Danger of injury! Never insert ngers into

opening!

<< In case of danger switch the machine off

with the mains switch, or with the emer-

gency switch, or unplug the machine!

<< Always unplug the machine from the

mains power supply before opening the

machine!

Repairs may only be performed by trained

personnel!

AREA OF APPLICATION:

The intimus 120SC2/CC3/CC4/CC5/CC6

data shredder is a machine used for shredding

general documents and

data carriers such CD’s, DVD’s, credit cards and

3.5” diskettes.

The machine must only be used to

shred paper, credit cards and CD’s,

DVD’s and 3.5” diskettes.

Shredding other sorts of data carriers

may cause damage to the machine (e.g.

damage to the cutters etc.).

INSTALLATION:

- Unpack the machine and put it together.

- Fit the plastic bag onto the bag frame.

- Connect the machine to the power with the

plug (1) (Fig. 2) (For information on the right

fuse for the plug see “TECHNICAL DATA”).

The socket outlet shall be installed

near the equipment and shall be easily

accessible!

Only operate the machine in enclosed

rooms at temperatures between 10°C

and 25°C!

120SC2

120CC3

120CC4

120CC5

120CC6

90134 9 08/13

OPERATION

INITIATION

g. 1

g. 2

g. 3

6 = Controldisplay(g.1)

“Material jam in machine”/

“Simultaneous material feed” / “Light

barrier covered when door opens or

when machine turned on”

For the procedures see the relevant

description under the “MALFUNCTION”

section.

a) “Material jam in machine”

Comes on when too much material has

been fed into the cutters. The cutters

jam, then run in reverse for a short time

and stop. The motor switches off.

b) “Simultaneous material feed”

Comes on when material has been fed

into both slots at the same time. The

cutters stop, then run in reverse for a

short time and stop. The motor switches

off.

c) “Light barrier covered

when door open”

Comes on when there is still material in

one of the two feed slots when the door

is opened. The cutters stop. The motor

switches off.

d) “Light barrier covered

when machine turned on”

Comes on when there is still material

in one of the two feed slots when the

machine is switched on.

CONTROLS:

1 = Mainsplug(g.2)

When the machine is rst plugged in it is

not on.

2 = Functionbuttons(g.1)

“Ready”/ “Off” / “Stop“

This button has three functions:

a) “Ready”

The machine changes to “Ready” if you

press this button briey.

At the same time the integral LED

display comes on.

b) “Off”

The machine switches off if it is in the

“Ready” mode and the button is held

down for about 3 seconds.

Note: The machine switches off

automatically if it is not used for about 5

minutes.

c) “Stop”

If you press this button briey when the

cutters are running they switch off and

stop.

3 = Forwardsbutton(g.1)

This button has two functions:

a) If this button is pressed briey, the

cutting mechanism runs forwards for a

few seconds, e.g. to remove remaining

material from the cutting mechanism.

At the same time the integrated LED

display lights up.

b) If this button is pressed and held

for approx. two secs., the cutting

mechanism runs forwards continually

and materials to be shredded can be fed

into the machine. At the same time the

integrated LED display lights up.

4 = Reversebutton(g.1)

If you press this button the cutters run

backwards for a short time. At the same

time the integral LED display comes on.

5 = Lightbarrier(Forwardmotion)(g.3)

The shredding procedure starts as soon

as material is fed into one of the two feed

slots. At the same time the integral forward

button LED display comes on.

Translation of the Original Operation Manual

Übersetzung der Originalbetriebsanleitung

1 2 3 4 5 6 7 8 9 10 ... 55 56

Comments to this Manuals

No comments

Intimus 120 CC4 User Manual Page 5

Comments to this Manuals

Related products and manuals for Shredders Intimus 120 CC4